Piranha's Amazing, Floating, Propeller Wrench.
Lose That Sinking Feeling Everytime You Drop The Prop Spanner.
Redesigned for 2008!!
This amazing tool is modular and composite ... just like Piranha Propellers.
This means you can change the inserts so that it fits nine different size
propeller nuts, both metric and imperial.
This tool is so versatile it can be used for changing the
propeller on just about any outboard or sterndrive.
The strength of the wrench has been improved for 2005.
thanks to a new composite material developed at the factory specifically for our prop wrench.
Piranha's wrench is a multifunctional tool designed to work with any
outboard or sterndrive fitted with any brand of propeller while providing
additional benefits to boaters equipped with a Piranha prop.
Just like the previous prop wrench, this
model floats if dropped in the water instead of sinking straight to the
bottom.
The composite foam construction also makes the wrench
non-corroding, even in the harshest salt water environment
The biggest improvement to the design is the modular prop nut insert
system. This system allows the wrench to be fitted to practically any Outboard or
Sterndrive prop nuts in common use (Metric and Imperial)!
Fits most nuts
The wrench includes 7 inserts plus 2 cavities so that
it can fit 9 different standard/ metric nut sizes. Find the insert that
fits your prop's nut, install it in the wrench handle, and you're all
set!
The Piranha design engineers textured the wrench handle to give you a better grip and made the
handle a full 30 centimetres (one foot) long for lots of leverage.
 |
|
Wrench Fits these sizes |
- 1-1/4" and 32 mm
- 1-1/16" and 28 mm
- 15/16" and 24 mm
- 7/8" and 22 mm
- 13/16" and 21 mm
- 3/4" and 19 mm
- 11/16" and 17 mm
- 9/16" and 15 mm
- 17/32" and 14 mm
|
Built Tough just like Piranha Props!
Piranha Propellers constructed the wrench handle from a foam
composite polypropylene copolymer. The cellular core handle produces high
strength with the least weight.
The same strong Verton® composite that's used to make Piranha propeller blades is also used for the wrench inserts.
The Verton® inserts
yeild optimum dimensional tolerance needed for an accurate fit, without
adding so much weight that the wrench no longer floats.
Bonus Feature!
Users of Piranha 4-Blade Propellers will appreciate
the other end of the new wrench too! Piranha incorporated a blade extraction
slot to help remove tight fitting blades on Piranha 4 Blade propellers.
Position the propeller backwards on the propeller shaft.
 Slip
the handle in the exhaust port then use the wrench to drive out your old
blades.
It is simple, easy, and eliminates the need for any other tools.
WHY WOULD YOU GO BOATING WITHOUT ONE?
They only cost $37-75 and you can order your
"Floating Prop Spanner"
by clicking on the
"Contact Us" link in the left hand margin.
Back
To Site Navigation Menu
Contact Us.
| 